SPOT Series
- Overview
- Features
- Specification
- Images
- Drawings
- Documentation
The SPOT products are actively Q switched diode pumped solid state lasers. Utilising advanced technology, these lasers have been developed to provide a short pulse output with very low jitter. The compact design enables the laser to be easily integrated into scientific instrumentation. Fundamental YAG wavelength and its harmonics down to 355nm are offered within this product range. SPOT lasers can also be used to pump Elforlight dye laser products.
- Pulse width <2ns and low jitter
- USB (RS232) interface
- Interlock, on/off keyswitch interface
- Manual safety shutter
- Active current limit
- Auto power up sequence: warmup, current mode
- Laser diode protection circuitry
- Monitor following parameters:
- Diode current limit, diode current setpoint, actual diode current
- Diode & chipset temperature setpoint, actual temperature
- Laser head & controller temperatures
- Internal trigger parmeters
- Diode on-time hour counter
- Heatsink overtemp sensor
- Laser-head overtemp sensor
- Designed and manufactured in the U.K.
Model | SPOT-10-500-1064 | SPOT-10-100-532 | SPOT-10-200-532 | SPOT-10-100-355 | |
---|---|---|---|---|---|
Wavelength | 1064nm | 532nm | 355nm | ||
Pulse Energy | 50µJ | 10µJ | 20µJ | 10µJ | |
Pulse Width | < 2ns | < 1.8ns | < 1.5ns | ||
Repetition Rate | 0 - 50kHz | 0 - 50kHz | 0 - 40kHz | ||
Spatial Mode | TEM00 M2 < 1.2 | ||||
Jitter | < +/- 1ns |